Valve

The types of valves in the piping system

We sell various types of valves for your industrial piping system, namely:
1. Butterfly Valve
is a versatile type of valve, because many applications are used in any piping system. Butterfly Valve can be installed on various media installations through which both liquid, gas and mud with various levels of pressure and temperature. This type of valve can be used in installations at low, medium or high pressure.
2. Ball Valve
Is a type of valve with a round disc-shaped flow controller that is widely used because it is easy to repair and the ability to withstand high pressure and temperature. Bal Valve is able to withstand pressures up to 10,000 Psi and with temperatures around 200 degrees Celsius.
3. Check Valve
It is a valve that is used to make fluid flow only flow in one direction or to prevent reversed flow / back flow or to flow fluid to one direction only and prevent the flow in the opposite direction. Because of its function which can prevent backflow, the check valve is usually used as a security from an equipment in the piping system.
4. Globe Valve
Is a valve whose function is to regulate the size of the fluid flow rate in the pipe. The valve handle can be rotated easily, so that the amount of material flowing through the valve can be adjusted. With a valve stand that is parallel to the flow, making the globe valve is very efficient when adjusting the size of the flow with a minimum of erosion of the dish and stand.
5. Gate Valve
Is a valve whose function is to open the flow by lifting the closing gate which is round or rectangular. This type of valve is not used to adjust the small rate of a fluid flow by opening half or a quarter of its position. So the position of the gate on this valve must be completely open or completely closed.