PT Tricon Dos Sejahtera
PTTricon Dos Sejahtera - Jual Pipa dan Valve
Selling quality flanges at the best prices
Flange is a tool whose function is to connect between two piping systems, connect between pipes with equipment, or to connect pipes with valves or other components so that it becomes a unified whole by using bolts as adhesive. With the flange as a piping connection component, it will facilitate the work, maintenance, repair or replacement of other components without damaging the component itself. We sell various types of quality flanges at the best prices.
BLINDSIZE. 1/2" - 40"SPECIFICATION :MATERIAL :* A105, LF2, F304, F304L, F316, F316LCLASSESANSI 150, ANSI 300, ANSI 600, ANSI 900, ANSI 1500, ANSI...
Lap JoinSize : 1/2" - 24"PN 10, PN 16, JIS 10K, JIS 20K, ANSI 150Sch 10, 20, 30, 40, 80 Face Type : Flate Face (FF), Raised Face (RF)End Connection :...
THREADED :THREADED , WELD NECK , SO , SW , SLIP ON , BLIND , MURAH JAKARTA, MURAH SURABAYA, MURAH MEDAN, MURAH KALIMANTAN, MURAH BALIK PAPAN,...
Blind Adaptor WELD NECK, SLIP ON , BLIND , SOCKET WELD , ORIFICE , SW , WN SO , SPECTACLE BLINDDIA. 1/2" - 32"ANSI : #150, #300, #600, #900,...
WN RTJ : WELD NECK, SLIP ON FALNGE, SW , FLANFE RTJ, RF, BLIND , SOCKET WELD , CS, SS, WM, SO , BLIND , MURAH, WNDIA. 1/2" - 32"CLASS :...
WN :DIA. 1/2" - 54"CLASS : ANSI 150, ANSI #300, ANSI #600, ANSI #900, ANSI #1500, ANSI #2500MATERIAL : A105/A105N, A182 F304/304L, A182...
SPECTACLE :Size : 1/ 2 ” ~ 64 ”Material :Carbon Steel ASTM A-516 Gr.70 / A-105Standard :ASME B16.48Place of Origin : Indonesia /...
ORIFICE :Size : 1/ 2 ” ~ 24”Material :Carbon Steel ASTM A-105/A105N, A182 F304/304L, A182 F316/316L, A182 F11Standard :ASME B16.5Place of...
SOMaterial :ASTM A105/A105N, A182 F304/304L,F316/316L,classes* 150 LB- 2500LBstandards :* ASMEB.16.5* ASMEB.16.47 ( A/Bseries)sizes :* 1/ 2 inch -...
Socket Weld SO , WN , SW , LOOSE DIA. 1/2" - 54"CLASS : ANSI 150, ANSI #300, ANSI #600, ANSI #900, ANSI #1500, ANSI #2500, JIS 10, 20K, 40K...
Based on ANSI (American National Standards Institute)
flange can be divided into several types including:
1. Socket Flange
Is a type of flange that on the outer side there is resistance which causes the pipe inserted into it to not come out.
2. Threaded Flange
There is a type of flange that has an internal thread. Usually Threaded Flanges are used for low pressure and are not used for very high temperatures or stress.
3. Weldneck Flange
Weldneck flange j is widely used in a plant, because it is easy to connect with a pipe. This type of flange can be used for high pressure, both for low or high temperatures. The Weldneck flange is a connecting flange that uses weld.
4. Slip On Flange
Is a type of flange that has low shock and vibration resistance. Slip On Flange is suitable for use at low pressure.
© -Powered by Indotrading.
